Skip to content

HiModel

2.4G 6-CHANNEL MICROLITE ADMS RECEIVER DM610E

Type6 CH Parkflyer
ModulationADMS
Dimension(WxLxH)18.5x43.5x9.2mm
Weight4.0g
Input Voltage Range3.6-10.0V

, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, , ,

Features: Features: -6 channel parkflyer receiver -ADMS modulation system -2.4G ...

RCPlanet

TRAXXAS E-REVO 1/16 4WD MONSTER TRUCK RTR W/ TQ 2.4GHZ RADIO TRA71054

5.041, (reversed input
15.751 (stock, out-of-box)

, Length:, 12.6" (320mm), Front Track:, 9.4" (239mm), Rear Track:, 9.4" (239mm), Weight:, 44oz (1.24kg), Height (overall):, 4.6" (117mm), Wheelbase:, 7.9" (202mm), Wheel Diameter:, 2.0" (50.8mm), Shock Length (front/rear):, 48mm / 48mm, Front/Rear Tires (glued):, Talon 2.0", Front/Rear Wheels:, 2.0" Gemini (black-chrome), Electronic Speed Control:, Waterproof XL-2.5 ESC, Motor (electric):, Titan 12T 550, Transmission:, Heavy-Duty Single Speed, Gear Ratio (internal):, Overall Drive Ratio:, Differential Type:, Hardened Steel Bevel, Sealed, Gear Pitch:, 48-Pitch, Chassis Structure/Material:, Molded Composite Nylon Monocoque, Brake Type:, Electronic, Drive System:, Shaft-Driven 4WD, Steering:, Bellcrank, Radio System:, TQ 2.4GHz, Top Speed:, 20+mph, Skill Level:, 1, Battery Tray Dimensions:, 89mm x 35.5mm x 20mm, Included Batteries:, 6-cell NiMh with Charger, Required Batteries:, 8 "AA" (transmitter), ,

This is the 1/16 scale Traxxas E-Revo 4WD Monster Truck ...

GetFPV

DJI WOOKONG MULTI-ROTOR AUTOPILOT

Stop MotorTwo provided options to stop motors

Start Motor: When using WKM, pushing throttle stick before takeoff will not start motors. You have to execute any one of following four Combination Stick Commands (CSC) to start motors.,

Details WooKong-M is a complete flight control system for all ...

HobbyKing

SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM

Dimensions control unit34x23.8x11mm
Dimensions sensor20.6x20.6x9.6mm
Sensor lead160mm length
Standard setupDataPod
Computer connectivityDataPod Bridge Mode
Operating voltage3.8V to 8.4V
Current draw<100mA

Features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,

Designed for 3D Pro pilots and beginner alike the Vortex ...

HobbyKing

SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM W/DATAPOD

Dimensions control unit34x23.8x11mm
Dimensions sensor20.6x20.6x9.6mm
Sensor lead160mm length
Standard setupDataPod
Computer connectivityDataPod Bridge Mode
Operating voltage3.8V to 8.4V
Current draw<100mA

Key features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,

Designed for 3D Pro pilots and beginner alike the Vortex ...

ReadyMadeRC

3D FPV CAMERA

,

3D FPV Camera from EMR Labs NTSC signal, field sequential ...

HobbyKing

AERO SUBARU FA 200, BALSA/EP, 1040MM (ARF)

Wingspan1040mm
Wing Area19dm2
Length810mm
Weight650g~700g

Features:, • Traditional Lightweight Balsa Construction, Specs:, Requires:, Your Own 4 Channel TX/RX,

This great looking and amazingly well priced little Aero Subaru ...

GetFPV

LUMENIER CU-690 ULTRA - 690TVL ULTRA WDR

Power inputDC12V
Details The Lumenier CU-690 Ultra - 690TVL cameras adopt Pixim's ...

ReadyMadeRC

DJI NAZA-M LITE MAIN CONTROLLER ONLY

Please noteNaza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED.

Includes:, 1. Naza-Lite Gyro, All-in-One Design:, For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control., Downloads:, CLICK HERE,

LIMIT 1 PER ORDER PER DAY That's right! Flight Controller ...

ReadyMadeRC

DJI NAZA-M LITE GPS ANTENNA ONLY

Please noteNaza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED.

All-in-One Design:,

REPLACEMENT GPS ANTENNA ONLY Introducing the all new DJI Naza-M ...

ReadyMadeRC

DJI NAZA-M LITE & GPS COMBO SET

Please noteNaza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED.

All-in-One Design:, , Includes:, 1. Naza-Lite Gyro, Downloads:,

That's right! Flight Controller with GPS for under $220.00! Introducing ...

ReadyMadeRC

CASTLE CREATIONS PHOENIX EDGE 75 BRUSHLESS ESC, 34V MAX. W/BEC

MIN2S LiPo MAX

Helis:, 500 class, Fixed wing:, .40 - .52, Input voltage:, Max continuous amperage at full throttle:, 75 amps*, BEC voltage (voltage regulator for powering radio and sevos):, User selectable choice from 5 to 8.4 volt output, BEC output amperage:, 5 amp peak**, Width:, 2.0" (50.8mm), Length:, 2.8" (71.9mm), Height:, 0.9" (23.2mm), Weight w/wires:, 4.0 oz (113.4g), Weight w/o wires:, 2.5 oz (70.9g), Programmability:, Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software., Connectors:, Battery and motor connectors sold separately, Tools needed for installation:, Soldering iron and solder to attach bullets to motor wires and battery connector to power wires., *RC HOBBY APPLICATION RATING: 75 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.,

With the debut of the Phoenix Edge series of ESCs ...

HobbyKing

ZEROUAV YS-X6-P 10 WAYPOINT AUTOPILOT GPS FLIGHT CONTROL SYSTEM

Operating voltage3.7~22.2V
GPS/Compass55x11mm
2.4ghz WiFi unit65x40x14.5mm
Weight (w/all components)Aprox. 212grams
Vertical Direction0.5m
Maximum Tail Rudder angular velocity180degree/Sec
Maximum Climb Rate4M/S
Maximum Descent Speed4M/S
Inlcuded in box1x Main Controller

Features:, YS-X6-P update version now with 10 waypoints standard, Specs:, MC:92x61x18mm, MU:48.5x40.5x22mm, Way points:, 10 Programmable as standard (Upgradeable), Hover precision (Hover Automatically under GPS mode):, Horizontal direction:2m, Wind resistance:, - 8m/s(17.9mph/28.2km/h), Maximum Tilt Angle:25,

The ZeroUAV YS-X6-P autopilot is a tremendous flight controller system ...

HobbyKing

ZEROUAV ZERO-STEADI470 QUADCOPTER AERIAL PHOTOGRAPHY SYSTEM (YS-X6-P FLIGHT CONTROL SYSTEM) (PNF)

GPS/Compass55x11mm
2.4ghz WiFi unit65x40x14.5mm
Weight (w/all components)Aprox. 212grams
Max take-off weight2.8kg
Wind Assistant capability7-8m/s
Flight altitude1000m (max)

Features (YS-X6-P):, YS-X6-P update version now with 10 waypoints standard, YS-X6-P Flight Controller Specs:, Operating voltage:, 3.7~22.2V (no UBEC is required), MC:92x61x18mm, MU:48.5x40.5x22mm, Way points:, 10 Programmable as standard (Upgradeable), ZERO-Stedi470 Quadcopter Specs:, Max payload weight:, 300-400g (SONY 5N, GH2), Flight Endurance:, 18 minutes @ no payload, 10~12 minutes @ max payload., Operational speed:, Max 10.2m/s (adjustable), Included in box:, 1 x Quadcopter Airframe, Requires:, Your own 4~6CH transmitter & receiver or Android/IOS mobile device,

As we all know, video jitter is one of the ...

ReadyMadeRC

GOPROFESSIONAL CASES - PHANTOM/GOPRO HARD CASE

Exterior Dimensions20.25" x 16.93" x 8.78"
Weight13.15 lbs

Features:, All our products are the highest water-jet precision cut.  We never cut corners and die-cut or punch cut our custom cases., The XB-DJI Will Fit 9" Props:, 1 DJI Phantom, GoPro Equipment:, 1 Additional GoPro Hero, Specifications:,

Go Professional Cases Introduces the XB-DJIFS The Elite Original Customized ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby